To install a kitchen dome ceiling light, starting with pull the fuse holder or turn the power switch that supplies power to the electrical line running through the kitchen. Make sure there is no electrical power. Put a ladder underneath that lamp. Turn the lamp cap with your hand. Take the lamp cover. Lay them aside. Remove bulbs from the lamp bulb sockets. Turn them counterclockwise until they come loose and put them aside.
Remove screws from around the lamp with Phillips screwdriver. Pull the lamp out the ceiling stand plate. Removing the tabs twist that is screwed on pair of wires comes out of the hole in the ceiling stand plate. Twist the wires to separate them from the lamp and the electrical socket in the hole. Place the lamp aside. Wind exposed end of the black wire from dome ceiling light fixture around the black wire from the electrical socket. Connect the white wire in the same way.
24 Photos Gallery of: To Install A Kitchen Dome Ceiling Light
Screw a twist tab on each pair of wires clockwise until you feel a resistor. Turn the dome light fixture into the ceiling stand plate with the screws taken from the other light fixtures, use the Phillips screwdriver. Insert a light bulb or bulbs – depending on the number of bulb sockets in the luminaries – in dome ceiling light fixtures. Insert the hole in the center of the dome through the extruding screw at the bottom of the dome light fixture. Screw the dome cap on the screw clockwise until resistance can be felt. Restore electrical power to the kitchen.dome ceiling light