Low Ceiling Lighting Ideas
Low ceiling lighting – Changing a ceiling lamp is a sufficiently basic task that most homeowners should be able to perform themselves. Although high ceilings, it’s quite simple. Just stay relaxed and extra careful when using a ladder and turn off electricity where you will work. A good rule of thumb is to provide at least 1 watt light bulb for each square meter in the living room or bedroom and double the amount of a kitchen or workshop. With fluorescent lamps, count about 1/3 watts per square meter in the living room and 1/2 watts per square meter in the kitchen.
24 Photos Gallery of: Low Ceiling Lighting Ideas
Turn off the power to the low ceiling lighting circuit. Set up for the steps where the ceiling fixture is located and remove the screws that hold the fixture to the ceiling. Use an inductive voltage detector to double-check that the power is turned off. Disconnect the future wires and remove the old luminaire and strap. Attach the new metal mobile phone over the outlet box using the supplied screws. If there is a ground wire in the box, attach it to the earth screw on the tape.
Connect the new low ceiling lighting to the wires by winding the ends of the wires clockwise under the wrenches (black cable to brass-colored screw, white wire to silver-colored screw), or by connecting them to the wires of the new luminaire with cable connectors. Fold the wires in the outlet box and attach the new game assembly to the mounting strap with the screws. Install the lamp and mount the lighting cover or the world. Reset the power that was turned off and test the lighting by operating it. Step down from the ladder carefully.lights for low ceilings kitchen, low ceiling lighting